PP(1) User Contributed Perl Documentation PP(1)
NAME
pp - PAR Packager
SYNOPSIS
pp [ -ABCEFILMPTSVXacdefghilmnoprsuvxz ] [ parfile | scriptfile ]...
EXAMPLES
Note: When running on Microsoft Windows, the a.out below will be replaced
by a.exe instead.
% pp hello.pl # Pack 'hello.pl' into executable 'a.out'
% pp -o hello hello.pl # Pack 'hello.pl' into executable 'hello'
# (or 'hello.exe' on Win32)
% pp -o foo foo.pl bar.pl # Pack 'foo.pl' and 'bar.pl' into 'foo'
% ./foo # Run 'foo.pl' inside 'foo'
% mv foo bar; ./bar # Run 'bar.pl' inside 'foo'
% mv bar baz; ./baz # Error: Can't open perl script "baz"
% pp -p file # Creates a PAR file, 'a.par'
% pp -o hello a.par # Pack 'a.par' to executable 'hello'
% pp -S -o hello file # Combine the two steps above
% pp -p -o out.par file # Creates 'out.par' from 'file'
% pp -B -p -o out.par file # same as above, but bundles core modules
# and removes any local paths from @INC
% pp -P -o out.pl file # Creates 'out.pl' from 'file'
% pp -B -p -o out.pl file # same as above, but bundles core modules
# and removes any local paths from @INC
# (-B is assumed when making executables)
% pp -e "print 123" # Pack a one-liner into 'a.out'
% pp -p -e "print 123" # Creates a PAR file 'a.par'
% pp -P -e "print 123" # Creates a perl script 'a.pl'
% pp -c hello # Check dependencies from "perl -c hello"
% pp -x hello # Check dependencies from "perl hello"
% pp -n -x hello # same as above, but skips static scanning
% pp -I /foo hello # Extra include paths
% pp -M Foo::Bar hello # Extra modules in the include path
% pp -M abbrev.pl hello # Extra libraries in the include path
% pp -X Foo::Bar hello # Exclude modules
% pp -a data.txt hello # Additional data files
% pp -r hello # Pack 'hello' into 'a.out', runs 'a.out'
% pp -r hello a b c # Pack 'hello' into 'a.out', runs 'a.out'
# with arguments 'a b c'
% pp hello --log=c # Pack 'hello' into 'a.out', logs
# messages into 'c'
# Pack 'hello' into a console-less 'out.exe' (Win32 only)
% pp --gui -o out.exe hello
% pp @file hello.pl # Pack 'hello.pl' but read _additional_
# options from file 'file'
DESCRIPTION
pp creates standalone executables from Perl programs, using the
compressed packager provided by PAR, and dependency detection heuristics
offered by Module::ScanDeps. Source files are compressed verbatim
without compilation.
You may think of pp as "perlcc that works without hassle". :-)
A GUI interface is also available as the tkpp command.
It does not provide the compilation-step acceleration provided by perlcc
(however, see -f below for byte-compiled, source-hiding techniques), but
makes up for it with better reliability, smaller executable size, and
full retrieval of original source code.
When a single input program is specified, the resulting executable will
behave identically as that program. However, when multiple programs are
packaged, the produced executable will run the one that has the same
basename as $0 (i.e. the filename used to invoke it). If nothing
matches, it dies with the error "Can't open perl script "$0"".
OPTIONS
Options are available in a short form and a long form. For example, the
three lines below are all equivalent:
% pp -o output.exe input.pl
% pp --output output.exe input.pl
% pp --output=output.exe input.pl
Since the command lines can become sufficiently long to reach the limits
imposed by some shells, it is possible to have pp read some of its
options from one or more text files. The basic usage is to just include
an argument starting with an 'at' (@) sigil. This argument will be
interpreted as a file to read options from. Mixing ordinary options and
@file options is possible. This is implemented using the Getopt::ArgvFile
module, so read its documentation for advanced usage.
-a, --addfile=FILE|DIR
Add an extra file into the package. If the file is a directory,
recursively add all files inside that directory, with links turned
into actual files.
By default, files are placed under "/" inside the package with their
original names. You may override this by appending the target
filename after a ";", like this:
% pp -a "old_filename.txt;new_filename.txt"
% pp -a "old_dirname;new_dirname"
You may specify "-a" multiple times.
-A, --addlist=FILE
Read a list of file/directory names from FILE, adding them into the
package. Each line in FILE is taken as an argument to -a above.
You may specify "-A" multiple times.
-B, --bundle
Bundle core modules in the resulting package. This option is enabled
by default, except when "-p" or "-P" is specified.
Since PAR version 0.953, this also strips any local paths from the
list of module search paths @INC before running the contained script.
-C, --clean
Clean up temporary files extracted from the application at runtime.
By default, these files are cached in the temporary directory; this
allows the program to start up faster next time.
-c, --compile
Run "perl -c inputfile" to determine additional run-time
dependencies.
-cd, --cachedeps=FILE
Use FILE to cache detected dependencies. Creates FILE unless present.
This will speed up the scanning process on subsequent runs.
-d, --dependent
Reduce the executable size by not including a copy of perl
interpreter. Executables built this way will need a separate
perl5x.dll or libperl.so to function correctly. This option is only
available if perl is built as a shared library.
-e, --eval=STRING
Package a one-liner, much the same as "perl -e '...'"
-E, --evalfeature=STRING
Behaves just like "-e", except that it implicitly enables all
optional features (in the main compilation unit) with Perl 5.10 and
later. See feature.
-x, --execute
Run "perl inputfile" to determine additional run-time dependencies.
Using this option, pp may be able to detect the use of modules that
can't be determined by static analysis of "inputfile". Examples are
stuff loaded by run-time loaders like Module::Runtime or "plugin"
loaders like Module::Loader. Note that which modules are detected
depends on which parts of your program are exercised when running
"inputfile". E.g. if your program immediately terminates when run as
"perl inputfile" because it lacks mandatory arguments, then this
option will probably have no effect. You may use --xargs to supply
arguments in this case.
--xargs=STRING
If -x is given, splits the "STRING" using the function "shellwords"
from Text::ParseWords and passes the result as @ARGV when running
"perl inputfile".
-X, --exclude=MODULE
Exclude the given module from the dependency search path and from the
package. If the given file is a zip or par or par executable, all the
files in the given file (except MANIFEST, META.yml and script/*) will
be excluded and the output file will "use" the given file at runtime.
-f, --filter=FILTER
Filter source script(s) with a PAR::Filter subclass. You may specify
multiple such filters.
If you wish to hide the source code from casual prying, this will do:
% pp -f Bleach source.pl
If you are more serious about hiding your source code, you should
have a look at Steve Hay's PAR::Filter::Crypto module. Make sure you
understand the Filter::Crypto caveats!
-g, --gui
Build an executable that does not have a console window. This option
is ignored on non-MSWin32 platforms or when "-p" is specified.
-h, --help
Show basic usage information.
-I, --lib=DIR
Add the given directory to the perl module search path. May be
specified multiple times.
-l, --link=FILE|LIBRARY
Add the given shared library (a.k.a. shared object or DLL) into the
packed file. Also accepts names under library paths; i.e. "-l
ncurses" means the same thing as "-l libncurses.so" or "-l
/usr/local/lib/libncurses.so" in most Unixes. May be specified
multiple times.
-L, --log=FILE
Log the output of packaging to a file rather than to stdout.
-F, --modfilter=FILTER[=REGEX],
Filter included perl module(s) with a PAR::Filter subclass. You may
specify multiple such filters.
By default, the PodStrip filter is applied. In case that causes
trouble, you can turn this off by setting the environment variable
"PAR_VERBATIM" to 1.
Since PAR 0.958, you can use an optional regular expression (REGEX
above) to select the files in the archive which should be filtered.
Example:
pp -o foo.exe -F Bleach=warnings\.pm$ foo.pl
This creates a binary executable foo.exe from foo.pl packaging all
files as usual except for files ending in "warnings.pm" which are
filtered with PAR::Filter::Bleach.
-M, --module=MODULE
Add the specified module into the package, along with its
dependencies.
The following variants may be used to add whole module namespaces:
-M Foo::**
Add every module in the "Foo" namespace except "Foo" itself, i.e.
add "Foo::Bar", "Foo::Bar::Quux" etc up to any depth.
-M Foo::*
Add every module at level 1 in the "Foo" namespace, i.e. add
"Foo::Bar", but neither "Foo::Bar::Quux" nor "Foo".
-M Foo::
Shorthand for "-M Foo -M Foo:**": every module in the "Foo"
namespace including "Foo" itself.
Instead of a module name, MODULE may also be specified as a filename
relative to the @INC path, i.e. "-M Module/ScanDeps.pm" means the
same thing as "-M Module::ScanDeps".
If MODULE has an extension that is not ".pm"/".ix"/".al", it will not
be scanned for dependencies, and will be placed under "/" instead of
"/lib/" inside the PAR file. This use is deprecated -- consider
using the -a option instead.
You may specify "-M" multiple times.
-m, --multiarch
Build a multi-architecture PAR file. Implies -p.
-n, --noscan
Skip the default static scanning altogether, using run-time
dependencies from -c or -x exclusively.
-N, --namespace=NAMESPACE
Add all modules in the namespace into the package, along with their
dependencies. If "NAMESPACE" is something like "Foo::Bar" then this
will add all modules "Foo/Bar/Quux.pm", "Foo/Bar/Fred/Barnie.pm" etc
that can be located in your module search path. It mimics the
behaviour of "plugin" loaders like Module::Loader.
This is different from using "-M Foo::Bar::", as the latter insists
on adding "Foo/Bar.pm" which might not exist in the above "plugin"
scenario.
You may specify "-N" multiple times.
-o, --output=FILE
File name for the final packaged executable.
-p, --par
Create PAR archives only; do not package to a standalone binary.
-P, --perlscript
Create stand-alone perl script; do not package to a standalone
binary.
-r, --run
Run the resulting packaged script after packaging it.
--reusable
EXPERIMENTAL
Make the packaged executable reusable for running arbitrary, external
Perl scripts as if they were part of the package:
pp -o myapp --reusable someapp.pl
./myapp --par-options --reuse otherapp.pl
The second line will run otherapp.pl instead of someapp.pl.
-S, --save
Do not delete generated PAR file after packaging.
-s, --sign
Cryptographically sign the generated PAR or binary file using
Module::Signature.
-T, --tempcache
Set the program unique part of the cache directory name that is used
if the program is run without -C. If not set, a hash of the
executable is used.
When the program is run, its contents are extracted to a temporary
directory. On Unix systems, this is commonly
/tmp/par-USER/cache-XXXXXXX. USER is replaced by the name of the
user running the program, but "spelled" in hex. XXXXXXX is either a
hash of the executable or the value passed to the "-T" or
"--tempcache" switch.
-u, --unicode
Package Unicode support (essentially utf8_heavy.pl and everything
below the directory unicore in your perl library).
This option exists because it is impossible to detect using static
analysis if your program needs Unicode support at runtime. (Note: If
your program contains "use utf8" this does not imply it needs Unicode
support. It merely says that your program is written in UTF-8.)
If your packed program exits with an error message like
Can't locate utf8_heavy.pl in @INC (@INC contains: ...)
try to pack it with "-u" (or use "-x").
-v, --verbose[=NUMBER]
Increase verbosity of output; NUMBER is an integer from 1 to 3, 3
being the most verbose. Defaults to 1 if specified without an
argument. Alternatively, -vv sets verbose level to 2, and -vvv sets
it to 3.
-V, --version
Display the version number and copyrights of this program.
-z, --compress=NUMBER
Set zip compression level; NUMBER is an integer from 0 to 9, 0 = no
compression, 9 = max compression. Defaults to 6 if -z is not used.
ENVIRONMENT
PP_OPTS
Command-line options (switches). Switches in this variable are taken
as if they were on every pp command line.
NOTES
Here are some recipes showing how to utilize pp to bundle source.pl with
all its dependencies, on target machines with different expected
settings:
Stone-alone setup:
To make a stand-alone executable, suitable for running on a machine
that doesn't have perl installed:
% pp -o packed.exe source.pl # makes packed.exe
# Now, deploy 'packed.exe' to target machine...
$ packed.exe # run it
Perl interpreter only, without core modules:
To make a packed .pl file including core modules, suitable for
running on a machine that has a perl interpreter, but where you want
to be sure of the versions of the core modules that your program
uses:
% pp -B -P -o packed.pl source.pl # makes packed.pl
# Now, deploy 'packed.pl' to target machine...
$ perl packed.pl # run it
Perl with core modules installed:
To make a packed .pl file without core modules, relying on the target
machine's perl interpreter and its core libraries. This produces a
significantly smaller file than the previous version:
% pp -P -o packed.pl source.pl # makes packed.pl
# Now, deploy 'packed.pl' to target machine...
$ perl packed.pl # run it
Perl with PAR.pm and its dependencies installed:
Make a separate archive and executable that uses the archive. This
relies upon the perl interpreter and libraries on the target machine.
% pp -p source.pl # makes source.par
% echo "use PAR 'source.par';" > packed.pl;
% cat source.pl >> packed.pl; # makes packed.pl
# Now, deploy 'source.par' and 'packed.pl' to target machine...
$ perl packed.pl # run it, perl + core modules required
Note that even if your perl was built with a shared library, the
'Stand-alone executable' above will not need a separate perl5x.dll or
libperl.so to function correctly. But even in this case, the underlying
system libraries such as libc must be compatible between the host and
target machines. Use "--dependent" if you are willing to ship the shared
library with the application, which can significantly reduce the
executable size.
SEE ALSO
tkpp, par.pl, parl, perlcc
PAR, PAR::Packer, Module::ScanDeps
Getopt::Long, Getopt::ArgvFile
ACKNOWLEDGMENTS
Simon Cozens, Tom Christiansen and Edward Peschko for writing perlcc;
this program try to mimic its interface as close as possible, and copied
liberally from their code.
Jan Dubois for writing the exetype.pl utility, which has been partially
adapted into the "-g" flag.
Mattia Barbon for providing the "myldr" binary loader code.
Jeff Goff for suggesting the name pp.
AUTHORS
Audrey Tang <cpan@audreyt.org>, Steffen Mueller <smueller@cpan.org>
Roderich Schupp <rschupp@cpan.org>
You can write to the mailing list at <par@perl.org>, or send an empty
mail to <par-subscribe@perl.org> to participate in the discussion.
Please submit bug reports to <bug-par-packer@rt.cpan.org>.
COPYRIGHT
Copyright 2002-2009 by Audrey Tang <cpan@audreyt.org>.
Neither this program nor the associated parl program impose any licensing
restrictions on files generated by their execution, in accordance with
the 8th article of the Artistic License:
"Aggregation of this Package with a commercial distribution is
always permitted provided that the use of this Package is embedded;
that is, when no overt attempt is made to make this Package's
interfaces visible to the end user of the commercial distribution.
Such use shall not be construed as a distribution of this Package."
Therefore, you are absolutely free to place any license on the resulting
executable, as long as the packed 3rd-party libraries are also available
under the Artistic License.
This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
See LICENSE.
perl v5.30.2 2020-03-08 PP(1)